GE Medical Systems, LLC: Device Recall

Recall Details

Recall Number

Z-2484-2024

Classification

Class II

Product Type

Device

Recalling Firm

GE Medical Systems, LLC

Status

Ongoing

Date Initiated

06/14/2024

Location

Waukesha, WI, United States

Voluntary/Mandated

Voluntary: Firm initiated

Product Quantity

1 unit

Reason for Recall

GE HealthCare has become aware that for certain MR systems, the system predicted B1+RMS value can exceed the B1+RMS user prescribed limit when scanning in Low SAR Mode and the following two conditions are met: 1. 2D FSE T2 FLAIR OR T2 FLAIR Propeller imaging sequence is selected, AND 2. the Optimized T2 FLAIR sequence option is turned off OR not included in the MR configuration. If this occurs, it can result in overheating of an MR conditional implant.

Product Description

SIGNA MAGNUS, with affected software versions: MR29.1, RX29.1; Nuclear Magnetic Resonance Imaging System - research use only

Distribution Pattern

Worldwide distribution.

Other Recalls by GE Medical Systems, LLC

• Class II: Risk 10/24/2025
  Some Senographe Pristina systems either have a missing or an incorrect X-Ray Warning label, which is a nonconformance to FDA Regulation 21 CFR ¿1020.30(j).
• Class II: Risk 09/18/2025
  The Ultrasound-Guided Attenuation Parameter (UGAP) measurement data may display inaccurate values representing liver steatosis. This could potentially lead to inappropriate clinical decisions impacting overall care.
• Class II: Risk 09/18/2025
  The Ultrasound-Guided Attenuation Parameter (UGAP) measurement data may display inaccurate values representing liver steatosis. This could potentially lead to inappropriate clinical decisions impacting overall care.
• Class II: Risk 09/18/2025
  The Ultrasound-Guided Attenuation Parameter (UGAP) measurement data may display inaccurate values representing liver steatosis. This could potentially lead to inappropriate clinical decisions impacting overall care.
• Class II: Risk 08/22/2025
  If a user incorrectly places the Acquisition Module into the Acquisition Module Holder, it can result in excessive bending and wear of the Acquisition Trunk Cable. This is visible as a damaged sheath or exposed wires. If a damaged Acquisition Trunk Cable is not recognized and removed from service, the cable can overheat with continued use.

View all recalls by GE Medical Systems, LLC →