Belmont Instrument LLC: Device Recall

Recall Details

Recall Number

Z-1099-2025

Classification

Class II

Product Type

Device

Recalling Firm

Belmont Instrument LLC

Status

Ongoing

Date Initiated

01/02/2025

Location

Billerica, MA, United States

Voluntary/Mandated

Voluntary: Firm initiated

Product Quantity

1,029 cases (12,348 sets)

Reason for Recall

Disposable set may leak during priming from a female quick connector due to a crack in the female quick connector, may lead to a potential delay in treatment since the set will need to be replaced by another set

Product Description

Belmont Medical 3-Spike Disposable Set used with the Belmont Rapid Infuser RI-2. Designed to be used in general operation in hospital or alternate care environments to provide warmed blood and fluids to any patients e10 kg requiring warmed infusion. Part Number:903-00006

Distribution Pattern

Worldwide distribution - US Nationwide and the countries of Australia, Canada, China, Japan, Malaysia, Poland, Switzerland, Taiwan (Province of China), Ukraine.

Other Recalls by Belmont Instrument LLC

• Class II: Risk 05/13/2025
  An investigation into a report of the patient wrap (ThermoWrap), used with the Allon device, exceeding the set temperature determined that if: 1. The Human Sensor Board is disconnected from the Controller Board in the Allon device AND the temperature alarms are disabled, or 2. The Water In and Water Out and Thermostat sensors are disconnected from the Human Sensor Board AND the temperature alarms are disabled, the device will proceed to heat the water above the hardware fault limit without notifying the user of the faulty condition.
• Class II: Risk 03/31/2025
  Potential crack in the female connector located on the Heat Exchanger/patient line set, which will lead to a fluid leak through the crack during priming of the Rapid Infuser.
• Class II: Risk 03/31/2025
  Potential crack in the female connector located on the Heat Exchanger in the set, which will lead to a fluid leak through the crack during priming of the rapid infuser.
• Class II: Risk 03/31/2025
  Potential crack in the female connector located on the Heat Exchanger in the set, which will lead to a fluid leak through the crack during priming of the rapid infuser.
• Class II: Risk 03/31/2025
  Potential crack in the female connector located on the Heat Exchanger in the set, which will lead to a fluid leak through the crack during priming of the rapid infuser.

View all recalls by Belmont Instrument LLC →