Beckman Coulter, Inc.: Device Recall

Recall Details

Recall Number

Z-0803-2025

Classification

Class II

Product Type

Device

Recalling Firm

Beckman Coulter, Inc.

Status

Ongoing

Date Initiated

11/26/2024

Location

Chaska, MN, United States

Voluntary/Mandated

Voluntary: Firm initiated

Product Quantity

362 units

Reason for Recall

Beckman Coulter has identified that some Access PTH reagent packs from lot 339071 may be over- or under-filled in well 0. The dispensed material in well 0 could be above or below specification, risking sealing issues, contamination, instrument errors, delays, or inaccurate results with a negative bias and increase in imprecision. The issue was confirmed on 10 April 2024 by Beckman Coulter through an internal non-conformance (NC-INT-66585). The well 0 scale on the filling line began malfunctioning on the fill immediately before PTH. The malfunction was not noticed until the majority of PTH was filled.

Product Description

Access Intact PTH assay, a paramagnetic particle, chemiluminescent immunoassay for the quantitative determination of intact parathyroid hormone (parathyrin, PTH) levels in human serum and plasma using the Access Immunoassay Systems, Catalog Number A16972

Distribution Pattern

Worldwide distribution - US Nationwide and the country of Canada.

Other Recalls by Beckman Coulter, Inc.

• Class II: Risk 12/23/2025
  Sample preparation system designed to automate staining, lysing, cell washing has a software error that causes samples to be dispensed close to or touching tube bottoms, which could dislodge fluid line, result in sample loss, spillage, make instrument inoperable and will lead to unintentional removal of 60-100 microliters from final sample, may lead to incorrect diagnosis or patient management.
• Class II: Risk 11/26/2025
  Beckman Coulter has determined that, due to a potential communication issue, the analyzers listed above may not successfully restart following a standard shutdown, even after multiple attempts. If this issue occurs, the instrument will be unable to complete initialization and transition to Ready mode and the instrument will not process patient samples, QCs or calibrators. This causes delayed results.
• Class II: Risk 11/26/2025
  Beckman Coulter has determined that, due to a potential communication issue, the analyzers listed above may not successfully restart following a standard shutdown, even after multiple attempts. If this issue occurs, the instrument will be unable to complete initialization and transition to Ready mode and the instrument will not process patient samples, QCs or calibrators. This causes delayed results.
• Class II: Risk 11/10/2025
  Due to specific lots of diluents contributing to elevated platelet Daily Checks background counts cycle with use with analyzers.
• Class II: Risk 11/07/2025
  It has been determined that certain lots of Access 2 Reaction Vessels may contain manufacturing deformities. The bottom (round end) of the Reaction Vessel may have a small protrusion or hair like deformity. This could cause causing instrument errors (e.g., pipetting, rake, wash carousel errors) that could delay patient results.

View all recalls by Beckman Coulter, Inc. →