Beckman Coulter Inc.: Device Recall

Recall Details

Recall Number

Z-0541-2026

Classification

Class II

Product Type

Device

Recalling Firm

Beckman Coulter Inc.

Status

Ongoing

Date Initiated

09/22/2025

Location

Brea, CA, United States

Voluntary/Mandated

Voluntary: Firm initiated

Product Quantity

25 units

Reason for Recall

Due to a software error code that crashes during acquisition on patient sample when running customer defined acquisition protocol. This may lead to delayed patient results.

Product Description

DxFLEX Flow Cytometer Catalog Number C78500 UDI-DI code: 15099590754013 The DxFLEX Flow Cytometer is intended for use as an in vitro diagnostic device for immunophenotyping up to ten fluorescent detection channels using three lasers (488 nm, 638 nm and 405 nm) and two light scatter detection channels. It is intended for use with in vitro diagnostic (IVD) assays and software that are indicated for use with the instrument.

Distribution Pattern

Worldwide - U.S. Nationwide distribution in the states of CA, CT, FL, IL, NY, OH, OR, TN, and TX. The country of India.

Other Recalls by Beckman Coulter Inc.

• Class II: Risk 12/23/2025
  Sample preparation system designed to automate staining, lysing, cell washing has a software error that causes samples to be dispensed close to or touching tube bottoms, which could dislodge fluid line, result in sample loss, spillage, make instrument inoperable and will lead to unintentional removal of 60-100 microliters from final sample, may lead to incorrect diagnosis or patient management.
• Class II: Risk 11/26/2025
  Beckman Coulter has determined that, due to a potential communication issue, the analyzers listed above may not successfully restart following a standard shutdown, even after multiple attempts. If this issue occurs, the instrument will be unable to complete initialization and transition to Ready mode and the instrument will not process patient samples, QCs or calibrators. This causes delayed results.
• Class II: Risk 11/26/2025
  Beckman Coulter has determined that, due to a potential communication issue, the analyzers listed above may not successfully restart following a standard shutdown, even after multiple attempts. If this issue occurs, the instrument will be unable to complete initialization and transition to Ready mode and the instrument will not process patient samples, QCs or calibrators. This causes delayed results.
• Class II: Risk 11/10/2025
  Due to specific lots of diluents contributing to elevated platelet Daily Checks background counts cycle with use with analyzers.
• Class II: Risk 11/07/2025
  It has been determined that certain lots of Access 2 Reaction Vessels may contain manufacturing deformities. The bottom (round end) of the Reaction Vessel may have a small protrusion or hair like deformity. This could cause causing instrument errors (e.g., pipetting, rake, wash carousel errors) that could delay patient results.

View all recalls by Beckman Coulter Inc. →